RFID读写器|RFID固定式读写器|RFID移动式读写器|RFID手持式读写器：北京天际联合科技发展有限公司

Features	Benefits
Cost-effective foundation for industrial-class RFID implementations Hosts applications directly on the reader	Delivers high-performance RFID data capture and communication as a stand-alone reader or as a system component
Hosts applications directly on the reader	Enables the real-time enterprise by allowing you to host applications best suited to your business and customize them to your data and network management requirements
Enterprise connectivity	Integrates control I/O ports to allow sensor and actuator peripherals (i.e. lights, PLCs) on forklifts, conveyors and portals to be intelligently initialized, directed and controlled
Tag protocol functionality	Supports EPC Gen 2 and Gen 1 tag constructs
Open standards-based architecture	Allows rapid development of custom software specifically tailored to meet data filtering and management requirements and lets you embed third-party applications for higher performance
Durable construction	Maximizes uptime and reduces maintenance and repair costs

Physical Characteristics
Dimensions:	8.75 in. L x 11.75 in. W x 2.0 in. H (approx. 22 cm x 30 cm x 5 cm)
Weight:	4.85 lbs. (2.2 kilograms)
Base:	Die-cast aluminum
Visual status indicators:	LEDs for power (green), activity (yellow) and error (red)
Connectivity
Network:	10/100 BaseT Ethernet - RJ45
External interfaces:	Control I/O Port (12) - DB15 USB Host Hardware - USB RS232 Serial Console - DB9
RF connectors:	Reverse TNC
Read points:	4 Read Points (4 Transmit Points, 4 Receive Points)
Power supply	+24v DC @ 1.2 amps
Environmental
Temperature:	IEC 60068-2-1/2/14
Operational:	-4° to +122° F /-20° to +50° C @95% RH
Storage	-40° to +158° F /-40° to +70° C @85% RH
Humidity:	IEC 60068-30/56 5-95% non-condensing
Vibration:	IEC 60068-2-6
Compliance
Safety:	EMI/RF emissions
Regulatory:	FCC Part 15C IC RSS210
Hardware/OS & F/W Mgmt
Memory:	Flash 64 MB; DRAM 64 MB
Operating system:	Win® CE (Version 4.2.0)
Firmware upgrade:	Web-based and remote firmware upgrade capabilities
Management protocols:	SNMP support and future support for MSP
Optional features
Frequency:	UHF band, 902-928 MHz US
Method:	Frequency Hopping Spread Spectrum (FHSS)
Power output:	4W EIRP
Tag protocols:	EPC Gen 1 (Class 0 Read-only, Class 0 Read/Write, Class 1) and EPC Gen 2
Synchronization:	Network Time Protocol
IP addressing:	Static and dynamic
Host interface protocols:	XML and Byte Stream